Choose your Region

Are you sure you want to proceed?

You will be leaving the Cook Medical website that you were viewing and going to a Cook Medical website for another region or country. Not all products are approved in all regulatory jurisdictions. The product information on these websites is intended only for licensed physicians and healthcare professionals.

Cook® Retrograde Intubation Set


The Cook Retrograde Intubation Set is intended to assist in intubation during difficult airway access procedures in adult and pediatric patients.¹

For complete instructions, age-specific recommendations, contraindications, warnings, and precautions, see the Instructions for Use associated with each product in the links below.

This product line is serviced by the following clinical division(s):

The products on this website are available for sale in the United States. Reference Part Numbers are not the same in all countries/regions. For products available in other countries, please choose one of our other websites from the region selector at the top of the site or contact your local Cook Medical representative.

Specifications

Order Number Reference Part Number Instructions
for Use (IFU)
MR
Status
Catheter
Fr/ Length cm
Wire Guide
Diameter/Length
inch/cm
Wire Guide
Tip Configuration
More Info
G57612 C-RETRO-6.0-50-38J-110-01
N/A 6.0/50 0.038/110 straight and 3 mm J Expand »
Additional Specs
Description
-
For Placement of ETT² with ID mm
2.5 or larger
Includes Adapter Type
not included
Included Components
Description
Quantity
Retrograde Intubation Catheter
1
Introducer needle
1
PTFE introducer needle
1
Syringe
1
Straight and 3 mm J-tip wire guide with positioning marks
1
Hemostat
1
G57613 C-RETRO-11.0-70-38J-110-01
N/A 11.0/70 0.038/110 straight and 3 mm J Expand »
Additional Specs
Description
-
For Placement of ETT² with ID mm
4 or larger
Includes Adapter Type
not included
Included Components
Description
Quantity
Retrograde Intubation Catheter
1
Introducer needle
1
PTFE introducer needle
1
Syringe
1
Straight and 3 mm J-tip wire guide with positioning marks
1
Hemostat
1
G57614 C-RETRO-14.0-70-38J-110-CAE-01
N/A 14.0/70 0.038/110 straight and 3 mm J Expand »
Additional Specs
Description
-
For Placement of ETT² with ID mm
5 or larger
Includes Adapter Type
15 mm and Luer lock
Included Components
Description
Quantity
Retrograde Intubation Catheter
1
Introducer needle
1
PTFE introducer needle
1
Syringe
1
Straight and 3 mm J-tip wire guide with positioning marks
1
Hemostat
1
Rapi-Fit® adapter (15 mm connector)
1
Rapi-Fit adapter (Luer lock connector)
1

1. The 6 French intubation catheter is recommended for placement of an endotracheal tube with an inner diameter of 2.5 mm or larger.

The 11 French intubation catheter is recommended for placement of an endotracheal tube with an inner diameter of 4.0 mm or larger.

The 14 French intubation catheter is recommended for placement of an endotracheal tube with an inner diameter of 5.0 mm or larger.

When used for high-pressure oxygenation with a Luer lock connector, the 14 French intubation catheter is recommended for patients older than 12 years of age.

2. Endotracheal tube not included.

Documents

Brochure

Mannequin and simulation offerings

CC-D63256-EN-F_IA_1692278404080.pdf »
English

Difficult Airway Brochure

CC-D62373-EN-F_M3_1687810056279.pdf »
English

Image Library